Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Jesse Wilson

Düzenleme onaylandı tarafından Jesse Wilson

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Remove the two 70mm torx-6 security screws in the bottom left and right corners.
-[* icon_caution] If the rumble motors fall out of frame, the wires may disconnect from the mother board.
+[* icon_caution] If the rumble motors fall out of frame, the wires may disconnect from the motherboard . The wires will have to be soldered to reattach the motor.
+[* red] Turn the device over and remove the two 70mm torx-6 security screws in the bottom left and right corners.