Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: Gracie Harder

Düzenleme onaylandı tarafından Gracie Harder

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[* black] Disconnect the two ribbons from connectors from the same board from the previous step, near the bottom left of the behind the screen.
+[* black] The ribbon connectors unlatch by pulling up on the very small brown plastic bar near the end of the ribbon.
+[* icon_caution] Be careful not to pull on the ribbons before unlatching. This may damage the connector and/or ribbons.

Resim 1

Önceki resim yok

Eklendi