Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Christopher Hill

Düzenlenme reddedildi tarafından Jake Devincenzi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Disconnect the microphone cable connector, removing tape as necessary.
[* icon_reminder] For the front bezel to sit properly, be sure to tuck the microphone cable and connector into the void next to the camera board.
[* black] If you are not removing the bezel, but just trying to access the internals, then you can leave the microphone cable attached and just lift the bottom of the bezel up and over the computer so that it rests face down. There is enough microphone cable to allow them to remain connected if you have the room.