| - | [* black] After vane has finished drying, check to see if the vane is on correctly and straight. If so the vane is replaced. If not, refer back to step 1 and start over. |
|---|
| + | [* black] After the vane has finished drying; check to see if the vane is on correctly and straight. If so, the vane was properly replaced. If not, refer back to step 1 and start over. |
|---|
| + | [* black] Note: If the vane is fixed, you may apply a small amount of acetone onto another q-tip and wipe off any excessive glue. Be sure not to wipe the new arrow vane. |
|---|