Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Lainie Clem

Düzenleme onaylandı tarafından Lainie Clem

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Separate the palm rest assembly from the bottom housing using the plastic opening tool.
-[* icon_note] It is recommended that you start from a corner and run the flat end of the plastic spudger along the edge of the housing.
+[* icon_note] It is recommended that you start from a corner and run the tip of the plastic opening tool along the edge of the housing.
[* icon_caution] Lift the palm rest assembly slowly to prevent damaging the two cables connecting it to the motherboard.