1. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* icon_note] Before you begin, be sure to turn off your laptop and discharge the battery down to 25%. |
|---|---|
| + | [* red] Use a Phillips screwdriver to remove the 15 screws securing the back cover. |
| + | [* black] Insert an opening tool or spudger in the seam and pry along the perimeter to loosen the back cover. |
| + | [* icon_caution] Do not insert the opening too too far into the back edge (with "Stealth" written on it), or you may damage the power LED. |
| + | [* icon_note] The back cover is secured with clips. Too much pressure from the spudger can break the clips, but some flex is not dangerous. |
| + | [* black] Remove the back cover. |
Resim 1
Önceki resim yok
Eklendi