Eşyalarını Tamir Et Topluluk Mağaza

7. Adımdaki Değişiklikler

Düzenleyen: iRobot —

Düzenleme onaylandı tarafından David Hodson

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Cross Member
[* black] Place the radio with the front facing down and the top of the radio facing you.
[* red] Remove the seven 6 mm screws holding the cross member in place.
-[* icon_note] The screw called out in yellow is slightly different than the other screws as it has a tighter thread pitch. Make sure it goes back in the same place.
+[* icon_caution] The screw called out in yellow is slightly different than the other screws. The length is the same but it has a tighter thread pitch. Make sure it goes back in the same place.