Craig CD681 Speakers Replacement 11 No'lu Adım Geçmişi

11. Adımdaki Değişiklikler

Düzenleyen: Eric Flores — 2 Ağu 2012

Düzenleme onaylandı tarafından Eric Flores

	[* red] Continue removing the circuit board's screws.
	[* black] On both sides place two fingers between the circuit board and the face of the radio.
-	[* black] Gently pull the circuit board straight back being careful not to break the volume and tuning ~~knobs~~ on the opposite side of the board.
-	[* icon_caution] The two white cables are soldered to the circuit board and the power transformer at the back of the radio.
+	[* black] Gently pull the circuit board straight back being careful not to break the volume and tuning knob posts on the opposite side of the board.
+	[* icon_caution] The two white cables are soldered to the circuit board and the power transformer at the back of the radio. The circuit board has to be set aside inside the radio.