11. Adımdaki Değişiklikler
Düzenleyen: Eric Flores —
Düzenleme onaylandı tarafından Eric Flores
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* red] Continue removing the circuit board's screws. | |
| [* black] On both sides place two fingers between the circuit board and the face of the radio. | |
| [* black] Gently pull the circuit board straight back being careful not to break the volume and tuning knob posts on the opposite side of the board. | |
| - | [* icon_caution] The two white cables are soldered to the circuit board and the power transformer at the back of the radio. |
| + | [* icon_caution] The two white cables are soldered to the circuit board and the power transformer at the back of the radio. Once removed, the circuit board has to be set aside ***inside*** the radio. |