Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: oldturkey03

Düzenleme onaylandı tarafından oldturkey03

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* blue] Remove the three ribbon cables. From left to right, the cables are for the flash capacitor, the lens, and the top control buttons.
-[* blue] Remove the screws that hold the logic board , as well as the two long ones that attached the front case.
-[* black] the crews are different sizes, keep the separate. The two long ones will hold the front case onto the camera, and only fit in the middle of the logic board.
+[* blue] Remove the screws that hold the logic board, as well as the two long ones that attached the front case.
+[* black] The screws are different sizes, keep the separate. The two long ones will hold the front case to the camera, and only fit in the middle of the logic board.