Eşyalarını Tamir Et Topluluk Mağaza

7. Adımdaki Değişiklikler

Düzenleyen: KC Armstrong —

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* blue] Remove the three ribbon cables. From left to right, the cables are for the flash capacitor, the lens, and the top control buttons.
[* blue] Remove the screws that hold the logic board, as well as the two long ones that attached the front case.
-[* black] The screws are different sizes, keep the separate. The two long ones will hold the front case to the camera, and only fit in the middle of the logic board.
+[* black] The screws are different sizes. Keep them separate. The two long ones will hold the front case to the camera, and they only fit in the middle of the logic board.