Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: oldturkey03

Düzenleme onaylandı tarafından oldturkey03

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[* black] Once the LCD is out of the frame just slide it down. the ribbon cables are folded underneath the LCD, and are placed between the holder and the LCD
+ [* red] These two ribbon cable will have to be removed next.
+[* blue] The main ribbon cable uses a clip to secure the cable to the connector.
+ [* blue] The smaller LCD backlight cable uses a compression connector to secure that cable. Just use your fingernails or a small tool to push the lock away from the connector. It should only have to move a few mm. This will remove the LCD.
+ [* black] Once the LCD is replaced and the camera is reassembled, this is the result you hopefully experience.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi