Eşyalarını Tamir Et Topluluk Mağaza

dreamGEAR Quad Dock Pro Power Board Replacement

Giriş

The Power Board is the board that charges the PS Move controllers. This is how you replace it.

Neye ihtiyacın var

  1. dreamGEAR Quad Dock Pro Power Board Replacement, Prerequisite Guide to Accessing Interior: adım 1, 2 resimden 1. dreamGEAR Quad Dock Pro Power Board Replacement, Prerequisite Guide to Accessing Interior: adım 1, 2 resimden 2.

    • Remove the rubber foot pads on the bottom of the device using a plastic opening tool.

    Düzenle

  2. dreamGEAR Quad Dock Pro Power Board Replacement: adım 2, 2 resimden 1. dreamGEAR Quad Dock Pro Power Board Replacement: adım 2, 2 resimden 2.

    • Remove the six 2 mm PH0 screws on the bottom of the device.

    • Four of those screws are located under the foot pads.

    Düzenle

  3. dreamGEAR Quad Dock Pro Power Board Replacement: adım 3, 1 resimden 1.

    • Gently remove the bottom of the device.

    Düzenle

  5. dreamGEAR Quad Dock Pro Power Board Replacement, Mother Board: adım 4, 2 resimden 1. dreamGEAR Quad Dock Pro Power Board Replacement, Mother Board: adım 4, 2 resimden 2.

    • Remove the four 1.8 mm J1 screws.

    • Remove the two 2mm PH0 screws.

    Düzenle

  6. dreamGEAR Quad Dock Pro Power Board Replacement: adım 5, 1 resimden 1.

    • Gently pick up the mother board

    • Pick the mother board straight up or you may risk damaging the mini-USB charging ports.

    Düzenle

  7. dreamGEAR Quad Dock Pro Power Board Replacement: adım 6, 2 resimden 1. dreamGEAR Quad Dock Pro Power Board Replacement: adım 6, 2 resimden 2.

    • Use a plastic opening tool or similar tool to gently pry the power ribbon cord out of its port.

    Düzenle

  8. dreamGEAR Quad Dock Pro Power Board Replacement, Power Board: adım 7, 2 resimden 1. dreamGEAR Quad Dock Pro Power Board Replacement, Power Board: adım 7, 2 resimden 2.

    • Remove the four 1.8 mm PH0 screws that are holding the board in.

    • When you remove these screws, the plastic cups inside the PS Move stations will fall out.

    Düzenle

  9. dreamGEAR Quad Dock Pro Power Board Replacement: adım 8, 1 resimden 1.

    • Pick up the board.

    • Pick the board straight up, or you risk damaging the charging ports.

    Düzenle

  10. dreamGEAR Quad Dock Pro Power Board Replacement: adım 9, 1 resimden 1.

    • Using a plastic opening tool or a similar tool, gently pry the power ribbon cord out of its port.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Jacob

Üyelik tarihi: 03/11/15

757 İtibar

6 adet Kılavuz yazıldı

Rozetler: 16

+13 tane daha rozet

Ekip

Colorado Springs, Team 4-4, Panko Spring 2015 Colorado Springs, Team 4-4, Panko Spring 2015 üyesi

UCCS-PANKO-S15S4G4

3 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 3

Her zaman: 241