Ana içeriğe geç
Yardım

iMac Intel 20" EMC 2133 and 2210 Display Panel Replacement

Adım 1 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 22kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Pull the LCD temperature sensor connector straight up out of its socket on the logic board.

If necessary, de-route the LCD temperature sensor cable from behind the logic board.

When you remove the LCD, check the routing of the LCD temperature display cable. On reinstalling the display, be sure this cable does not block one of the bottom screws for the front bezel.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.