Ana içeriğe geç
Yardım

Removing iPad 3 4G Front Panel

Adım 8 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 153kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

While the bottom edge is being heated by the iOpener, begin releasing the adhesive from the right edge of the iPad.

Slide the opening pick down along the edge of the iPad, releasing the adhesive as you go.

The adhesive is very strong, and some serious force may be required. Work carefully.

If you can see the tip of the opening pick underneath the front glass, pull the pick out just a little bit. While using the opening pick this deep won't damage anything, it may get adhesive residue all over the LCD.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.