Ana içeriğe geç
Yardım
Adım 6 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

The first thing I removed was the battery. There is a plastic rim around the battery with a gap in one spot. I inserted a small flat head screwdriver in this gap to get under the battery and then popped the battery up and out. I left it connected to the main board.

Next you have four connectors to remove. I simply popped them off with my fingernail. Hook it underneath and gently lever them up.

The connector with the yellow and blue rectangle on it in the pic is the camera connector. When you lift this connector the camera will be free to remove.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.