Ana içeriğe geç
Yardım

MacBook Pro 15" Touch Bar Late 2016 Trackpad Assembly Replacement

Adım 6 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 5kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Swing the display open slightly, but keep the MacBook upside-down. The trackpad assembly should separate and lay flat on the display.

Gently feed the trackpad's ribbon cable through its slot in the chassis.

Carefully note the correct slot for the trackpad cable during reassembly—it goes through the narrow slot alongside the battery, not the bigger slot near the MacBook Pro's front edge.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.