Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı


Adım 20 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Remove the fuel lines from the fuel filter assembly.

There are three lines - you are only removing two of them.

Remove the two lines that have plastic connectors on the ends.

Release the connections by pressing in on the plastic tabs similar to the vent hose connection we did in a previous step.

The large fuel line has two tabs (one on each side) - I was able to squeeze this with my fingers to remove.

The small fuel line has one tab - I used a screw driver to push that tab in.

After you push the tab(s) in, pull the fuel line off.

The third hose on the fuel filter assembly is fastened by a metal clip - do not remove this one. We'll remove the other end of this hose in the next step.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.