Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Adım 10 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

The display carries a status LED, some interconnect boards and chips that are fairly easily pried off of their adhesive.

The screen itself appears to be a single fused unit, so glass and display will need replacing together, making for a more expensive part.

You will also have to be extra careful not to separate the layers when trying to access any of the components in the display assembly. Pictured is a cracked display, and damage from separating the layers.

The components on the rear case include: upper sensor board (on a very fragile board), several antennas secured by a lot of tape (copper and otherwise), and hinges (with rubber plugs to hold cables).

Ideally the antennas won't fail, but their cables run through the hinges, which means some stress over time. The copper tape will complicate replacement.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.