Ana içeriğe geç
Yardım
Adım 2 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Remove the face-plate from the light switch by unscrewing the two 7.9mm oval head slotted screws with the 3/16" slotted screwdriver until the plate comes away freely.

Optional: Touch the voltage detector to the screws holding the wires to the sides of the light switch to test for voltage.

Flip light switch on and off to ensure no electricity is flowing through the switch.

Even though power is not flowing, be careful touching bare wire and test accordingly with the voltage detector.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.