Ana içeriğe geç
Adım 4 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Caution: The circuit board contains capacitors (they look like cylinders) that can shock you if they discharge. Be careful not to touch them as you work. If possible, use a capacitor discharge probe to safely rid the capacitors of dangerous charges.

Remove the three 0.7 mm Phillips #0 screws connecting the motherboard to the monitor.

Remove the four 0.7 mm Phillips #0 screws.

Use a spudger or plastic opening tool to disconnect the two red and two blue connectors by placing the tool into the crevice and lifting up the connector.

Ensure that your pry tool is ESD-safe.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.