Ana içeriğe geç
Yardım

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Click here to watch a video of how to trigger the autosampler with the node battery.

9. Make sure the jumper is on so that the LEDs will light up during the test.

10. Plug the red and black jumper wires into the node battery terminal plug. This should turn on the yellow LED.

11. Touch the white jumper wire to the red wire then the white wire until the bottle count goes to zero. The blue LED will light up after each connection.

The autosampler will then trigger the sampling. The green LED will blink the number of bottles it is on. The red LED will stay on until the sampling is complete.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.