Skip to main content
Help
Adım 19 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Here's the PCB flipped up and away from the camera chassis.

Note: there are 2 flex circuit paths connecting the circuit board to the chassis - they are soldered and can't be detached without re-soldering. Be careful not to bend the flex circuit too severely or it may break. I had to resolder one of the connections after I was done.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.