Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Yardım
Adım 4 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Any remains of the dampers will be visible now, including 4 little caps.

Thankfully, 1 was still in tact so I could measure it up. 25 mm x 10.5 mm with groove on each side.

Looks like the groove is to give a way out for sawdust and other muck.

Clean the 8 holes (both plates) and the small caps, note the groove, that seems to fit best when pointing to the sides of the sander when assembling.

Was pretty caked in some. Think it may have had some grease. So I assembled with some grease also.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.