Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Yardım
Adım 6 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

I used a combination of techniques: In vice between wood and used a triangular file to cut a small groove. Tiny Router in hand drill and carefully creating a little groove. Then cleanup by hand again on file in the vice.

In vice between wood and used a triangular file to cut a small groove.

Tiny Router (head < 1.5 mm) in hand drill and carefully creating a little groove.

Then cleanup by hand again on file in the vice.

This was a tricky job with the handtools available, and as soon as I thought I could pretend there was some kind of decent groove on both sides, I quit this task.

Cut to size. 9.5 cm /4....

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.