Ana içeriğe geç
Yardım

Huawei Mate 20 Rear Glass Replacement

Adım 2 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 6kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Secure a suction handle to the bottom of the back cover, as close to the edge as possible.

If the phone's rear glass is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed.

Lift the back cover with the suction handle to create a small gap between the cover and the frame.

Insert an opening pick into the gap.

If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.

Slide the opening pick to the bottom right corner.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.