Ana içeriğe geç
Yardım

iPhone 8 Front Camera and Sensor Cable Replacement

Adım 2 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 3kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Use the point of a spudger to gently pry the proximity sensor out of its recess on the front panel.

Try to get your tool all the way under the sensor to pry it away from the clear plastic beneath. If you pry only against the cable, the sensor may separate from the cable assembly and will need replacement. If you're replacing the sensor/cable assembly anyway, then it doesn't matter.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.