Ana içeriğe geç
Yardım

iPhone 8 Opening Procedure

Adım 3 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 55kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Heat an iOpener and thread it through the arms of the Anti-Clamp.

You can also use a hair dryer, heat gun, or hot plate—but extreme heat can damage the display and/or internal battery, so proceed with care.

Fold the iOpener so it lays on the bottom edge of the iPhone.

Wait one minute to give the adhesive a chance to release and present an opening gap.

Insert an opening pick into the gap.

If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.

Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

Skip the next three steps.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.