Ana içeriğe geç
Yardım
Adım 4 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Apply a suction cup to the display glass, as close to the center of the top edge as possible.

If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

Pull on the suction cup with strong, steady force to create a gap between the display glass and the frame.

Insert the point of an opening pick into the gap in the center of the earpiece speaker notch, working it downwards underneath the display.

Ensure the pick slides over the front-facing camera and is not pushing against it.

Due to the stubborn adhesive, this may take multiple attempts of reheating with the iOpener and separating with the suction cup before you get it right.

If you are having trouble creating a gap, apply more heat to the edge and try again.

Leave your pick in the seam to prevent the adhesive from reasealing.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.