Ana içeriğe geç
Yardım

iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement

Adım 22 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 13kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.

Repeat this step with the other adhesive strip and remove it.

If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.