Ana içeriğe geç
Yardım

HTC Droid Eris Motherboard Replacement

Adım 3 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 3kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Unscrew the four 1.2mm Phillips screws with the Phillips #00 screwdriver from the motherboard.

Place the four screws in a safe place and then carefully lift up and remove the motherboard, then set it aside.

Take a note of the moisture indicator located in the yellow rectangle on the bottom of the device in the second picture. If the moisture indicator is red then the device has water damage.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.