Use a pair of tweezers to peel back the black pull tab on the speaker's stretch-release adhesive until you can grip it with your fingers.

Grab the adhesive strip's pull tab and slowly pull the adhesive strip out from underneath the speaker.

Keep the angle of the adhesive strip as parallel to the laptop as you can. Try to avoid dragging it across the inside of the case.

Pull the adhesive strip until it's freed from under the speaker.

If the adhesive strip breaks, use a heated iOpener, a heat gun, or a hair dryer to help remove the adhesive:

Apply heat to the speaker to soften the adhesive underneath.

Carefully slide a spudger or opening pick underneath the speaker to separate the adhesive.