Ana içeriğe geç
Yardım
Adım 6 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Position the extendable footrest bar to the front frame at the desired height

Make sure the two bolt holes on the footrest bar line up with two of the holes on the front frame

Pick the suitable position for the footrest that will complement the recipient (the position may be changed later)

Using the 10mm wrench, secure the footrest bar to the front frame using the a flat-head bolt and nut pointing in towards the center of the wheelchair

Attach the footrest to the footrest bar with the bottom of the footrest pointing upwards

Match the footrest wedges up with the holes and attach the footrest to the front frame using 4 small bolts and tighten 4 small nuts onto the bolts using the 10mm wrench

The heads of the bolts should fit perfectly through the footrest

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.