Ana içeriğe geç
Yardım
Adım 9 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

The small black piece that is reattached in the next bullet will not snap into place until the inner cover is reattached. You will need to hold it in place until then.

Position the small black piece that fell out in Step 2 against the headphone jack on the side of the phone (circled in Picture 2).

Replace the inner cover on the phone by screwing in all four T6 screws (circled in Picture 3) with a T6 Torx screwdriver.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.