Ana içeriğe geç
Yardım

Google Pixel 6a Screen Replacement

Adım 1 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 9kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Remove the screen.

During reassembly:

If you replaced your screen, check the front-facing camera hole and the sensor cutout on your replacement screen, and remove any remaining liners.

Check your phone if the proximity sensor's rubber gasket is missing—it might be stuck to the back of your old screen. Replace it if necessary.

This is a good point to test your phone before sealing it up. Temporarily connect your screen, power on your phone, and make sure it works as expected. Before continuing with reassembly, power off your phone.

Remember to reinstall the display cable bracket.

Follow this guide to replace the screen adhesive.

If you're installing a new screen, follow this guide to calibrate the fingerprint sensor.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.