Ana içeriğe geç
Yardım

Logic Board Replacement

Adım 11 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 2kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Use a pair of tweezers to grip the first antenna connector, as close to its base as possible.

Lift straight up to disconnect the cable.

The antenna connectors on the logic board are very fragile. When disconnecting the cables, pull straight up—don’t bend them to the side.

Repeat for the second antenna cable.

To reattach antenna connectors like these, align the connector over its socket and press down with the flat end of a spudger. The connector should snap into place. This can be tricky and may take a few tries.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.