Ana içeriğe geç
Yardım

Opening Procedure (1st and 2nd Gen)

Adım 9 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 7kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

The top edge of the iPad contains the camera module, two ambient light sensors, the proximity sensor, and front microphone. These components are fragile and easily damaged if an opening pick is inserted too far. Only separate the adhesive in the marked locations to avoid damage.

The two ambient light sensors can be hard to see and can be located using a flashlight or by placing the iPad under a bright light.

Don't insert an opening pick more than 2 mm near the top left and right edges or you'll damage the ambient light sensors.

Don't insert an opening pick more than 1 mm near the middle of the top edge or you'll damage the camera module, proximity sensor, and front microphone.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.