Ana içeriğe geç
Yardım

Google Pixel 7a Rear Cover Replacement

Adım 10 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 14kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Don't insert your pick deeper than 5 mm along the right edge to avoid damaging the wireless charging coil.

For a visual reference, you can measure 5 mm from the tip and mark your pick with a permanent marker.

Insert a third opening pick in the bottom right corner of the rear cover.

Slide your pick up the right edge of the rear cover to separate its adhesive. Stop when you reach the camera bar.

Leave this pick in place to prevent the adhesive from resealing.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.