Ana içeriğe geç
Yardım

Motorola Moto X Back Cover Assembly Replacement

Adım 1 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 9kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

In the following steps you will be releasing the clips holding the phone's cases together. However, the back case is also secured with an adhesive pad. After separating the clips you will use an iOpener to allow the case to fully open. Do not attempt to fully open the phone before loosening the adhesive.

Insert a plastic opening tool into the seam between the front and rear covers near the SIM card slot.

Slide the plastic opening tool along the seam toward the upper corner.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.