Ana içeriğe geç
Yardım

Battery Disconnect

Adım 3 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 10kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Insert the flat end of a spudger under the right edge of the battery press connector and pry straight up to disconnect it.

To reconnect a press connector, align it over the socket and gently press down on one side until it clicks into place, then press down on the other side. It might take a few tries to align the connector.

To prevent damaging the surface mounted components around the battery and 5G mmWave connectors, only pry where instructed.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.