Ana içeriğe geç
Yardım
Adım 16 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Once more, the four wires from the inverter need to be fished through am opening in the back

Okay, now it's test time. Combine the Yellow On/Off wire with the Black Vin Wire. That will be the positive connection, the Red wire is ground and will be the negative. This inverter is rated 12-24Volt, so an old laptop power brick will be perfect.

Data line connected to a computer and power to the inverter shows a great image. The only issue with this right now is that the power to the monitor and the backlight are separate. I did not find a suitable power source on the original power board. Also, the brightness can not be adjusted with this hook up.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.