Ana içeriğe geç
Yardım

Logic Board Removal (Rear Cameras)

Adım 2 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran kılavuzu etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Insert the tip of an opening pick under the top edge of the press connector near the bottom right corner of the logic board.

Be very careful not to damage the small, surface-mounted components to the right of the connector.

Use the pick to pry up and disconnect the press connector.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.