Ana içeriğe geç
Yardım

DualSense Edge Rear Case Replacement

Adım 1 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 14kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

The L1 and R1 buttons are held in by two clips. If only one clip releases, move your spudger to the other side of the button to release the remaining clip. Don't continue prying on one side after a clip is released, or you risk breaking the other clip.

Insert the flat end of a spudger in the gap between the L1 and L2 buttons.

Use the spudger to pry out the L1 button.

The buttons tend to shoot out in this step. You can place your thumb over the button to prevent this.

Repeat this process to remove the R1 button.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.