Ana içeriğe geç
Yardım
Adım 3 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Look at the line that goes though the charger. This is all glued with some super adhesive that prevents you from just taking it apart.

You will have to cut through that plastic, go all the way around following that small space with your knife.

This will take a while, you have to cut the plastic from all the 4 sides. You will notice when you have cut through most of it.

Be careful with the side shown in the last picture. There are a couple of components that might be cut in the process.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.