Ana içeriğe geç
Yardım

InFocus LP540 Projector Main Board Replacement

Adım 5 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 2kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Use the T10 Torx screwdriver to remove the five 5mm screws located throughout the motherboard.

Pull up the five metal tabs located at the rear of the projector.

Do not pull up on the metal tabs too hard or too fast because they can break easily.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.