Ana içeriğe geç
Yardım

Sony NEX-7 LCD Assembly Replacement

Adım 7 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 2kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

The LCD assembly is attached with a concealed ribbon cable, so be gentle when you remove it.

The D ring brackets on either side are not attached, only held in mechanically. Once the LCD assembly starts to come out, they will detach.

Pull on the D rings on either side of the camera to start removing the assembly.

Once the brackets are cleared from black shell, take them off and set them aside.

Continue to remove the screen assembly.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.