Ana içeriğe geç
Yardım

iMac Intel 27" EMC 2546 Display Replacement

Adım 18 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 44kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Only lift the display a few inches—it is still attached to the iMac by data and power cables.

With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case.

If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.

Begin to lift the top of the display up from the frame.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.