Ana içeriğe geç
Yardım

iPhone 6 Front Panel Assembly Replacement

Adım 4 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 23kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Open the iPhone by swinging the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge.

Several clips along the top edge of the front panel form a partial hinge.

During reassembly, align the clips just below the top edge of the rear case. Then, slide the front panel upward until its top edge is flush with that of the rear case.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.