Skip to main content
Adım 3 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

You want to leave the tape attached to either the circuit board, or the battery its self.

Now use your spudger as a prying tool to insert underneath the battery and separate it from the back of the display.

Once you have entirely separated the battery from the back of the display, it will still be attached to the circuit board by the power cables.

To remove the cables from the circuit board, a soldering tool will be required. You will also need to solder the new battery cables back onto the circuit board.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.