Ana içeriğe geç
Yardım
Adım 7 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Only use alcohol as a final option. It may damage the printhead seals! IF USED, FLUSH WITH CLEAN WATER 3 TIMES.

Recommended circulation times: Alcohol: 5-10 minutes. Without alcohol: 15 minutes.

The water will get lighter as the ink breaks down. An ultrasonic cleaner may help break stubborn clogs.

Put the printhead in hot water. Repeat until the printhead is reasonably clean. Change the cleaning water frequently.

Wipe the printhead contacts and nozzles by hand to ensure these areas are dry.

Before reinstalling the printhead, let it air dry for ~3-4 hours. Using a fan may speed this step up.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.